WP jara simẹnti irin worm gearbox
apejuwe ọja:
WP worm gearbox is developed on the basis of WD gearbox. The worm is made of 45# high-quality steel by heat treatment. The worm wheel is made of tin bronze. The wear resistance is good, especially in the bearing capacity. The worm gearbox is mainly used for the reduction transmission of various mechanical equipments such as plastics, metallurgy, beverages, mining, lifting and transportation, and chemical construction.
Awọn abuda ṣiṣe
1. The transmission is stable, the vibration, impact and noise are small, the reduction ratio is large, the versatility is wide, and it can be used with various mechanical equipments.
2, can get a larger transmission ratio with a single-stage transmission, compact structure, most models of the gearbox have better self-locking, can save the brake device for mechanical equipment with braking requirements
3. The meshing friction loss of the worm screw tooth and the worm gear tooth surface is large, so the transmission efficiency is lower than the gear, easy to heat and high temperature.
4. Awọn ibeere ti o ga julọ fun lubrication ati itutu agbaiye.
5, good interoperability, worm gears are manufactured according to national standards, bearings, oil seals, etc. are used standard parts. 5,
6, iru apoti naa ni iru ipilẹ (apoti naa jẹ ọna inaro tabi petele pẹlu awo ẹsẹ) ati iru gbogbo agbaye (apoti naa jẹ parallelepiped onigun mẹrin, pẹlu ọpọlọpọ awọn ihò ti o wa titi, ko si awo isalẹ tabi isalẹ miiran) Awọn oriṣi oriṣiriṣi ti eto gẹgẹbi igbimọ ẹsẹ)
7. There are two basic types of input shaft connection (single input shaft and double input shaft) and two types of motor flanges.
8. The output and input shafts have the input shaft at the bottom and the top; the output shaft is up and down; the input shaft is up and down.
9. Two or three gearboxs can be used to form a multi-stage gearbox to obtain a great gear ratio.
Awọn ipo iṣẹ:
1. Iyara alajerun ti apoti gear worm ko le kọja 1500r / min.
2. Iwọn otutu ayika ṣiṣẹ jẹ -40 °C - + 40 °C. Nigbati iwọn otutu agbegbe iṣẹ ba dinku ju 0 °C, epo lubricating gbọdọ wa ni kikan si loke 0 °C ṣaaju ki o to bẹrẹ.
Nigbati iwọn otutu agbegbe iṣẹ ba ga ju 40 ° C, awọn igbese itutu gbọdọ wa ni mu.
3. The worm gearbox can be rotated in the positive and negative directions.
Awọn iṣọra:
1. Awọn ọpa jia alajerun ko le ṣee lo bi ọpa titẹ sii.
2. The supporting motor (ie power) cannot exceed the value specified on the label.
3. If the user wants to change the direction of the input shaft, the lower end cover of the lower shaft can be removed, the worm shaft can be taken out and the 180 can be adjusted. Just load it.
Do not hard knock when installed, slowly drive the two shafts to make them engage.
NER GROUP CO., LIMITED jẹ alamọja ọjọgbọn ati olutaja ti awọn idinku gearbox, awọn ọkọ jia ati awọn ọkọ onina fun ọpọlọpọ awọn ọdun lati China.
A gbagbọ pe a le ifọwọsowọpọ pẹlu rẹ lori iṣowo yii ati jọwọ kan si wa ti o ba nifẹ.
O gba kaabọsi lati ṣabẹwo si oju opo wẹẹbu katalogi wa fun alaye diẹ sii:
www.sogears.com
Alagbeka: + 86-18563806647
www.guomaodrive.com
https://twitter.com/gearboxmotor
Viber / Laini / Whatsapp / Wechat: 008618563806647
E-mail:
Opopona No.5 Wanshoushan, Yantai, Shandong, China
