Ẹya ẹrọ
Awọn afowodimu ifaworanhan fun awọn iwọn moto 280 - 400
Awọn afowodimu ifaworanhan fun awọn iwọn moto 280 - 315
Awọn afowodimu ifaworanhan fun awọn iwọn moto 355 - 400
Note: Slide rails that do not fulfill the DIN standard are available for motor size 450 on request.
A set of slide rails includes two complete rails with screws for mounting the motor on the rails. Screws for mounting the rails on the foundation are not included. Slide rails have unmachined lower surfaces and should be supported in a suitable manner before tightening down.
Slide rails can be ordered with article numbers shown in the table.
motor | boluti | petele | àdánù | ||||||||||||||
iwọn | Nkan ti ko si. | l1 | l2 | l3 | a | h | b1 | b2 | c | d | e1 | e2 | e3 | e4 | si awọn ẹsẹ | boluti | kg/2 pc |
280 | 3GZF334730-55 | 800 | 600 | 900 | 16 | 75 | 100 | 120 | 35 | 28 | 100 | 100 | 200 | 165 | M20x90 | M24x300 | 50 |
315 | 3GZF334730-56 | 1000 | 720 | 1100 | 16 | 80 | 120 | 140 | 40 | 28 | 140 | 140 | 240 | 190 | M24x100 | M24x300 | 80 |
355 - 400 | 3GZF334730-57 | 1250 | 485 | 1350 | 16 | 80 | 120 | 140 | 35 | 28 | 140 | 140 | 240 | 190 | M24x100 | M24x300 | 90 |
Motors in brief
Cast iron motors, sizes 71 - 132
Iwọn motor | 71 | 80 | 90 | 100 | 112 | 132 | |
Stator and end shields | awọn ohun elo ti | Simẹnti irin | |||||
Paint color shade | Munsell blue 8B 4.5/3.25 | ||||||
Corrosion class | C3 (medium) | ||||||
ẹsẹ | Integrated cast iron feet | ||||||
Awọn apẹrẹ | D-end | 6203-2Z/C3 | 6204-2Z/C3 | 6205-2Z/C3 | 6206-2Z/C3 | 6206-2Z/C | 6208-2Z/C3 |
N-end | 6202-2Z/C3 | 6203-2Z/C3 | 6204-2Z/C3 | 6205-2Z/C3 | 6205-2Z/C3 *) | 6208-2Z/C3 | |
Axially locked bearings | Locked at D-end | ||||||
Bearing seals | D-end | V-oruka | |||||
N-end | Labyrinth seal in IE2, V-ring in IE3 | ||||||
lubrication | Permanently lubricated shielded bearings | ||||||
Measuring nipples for | Ko kun | ||||||
condition monitoring of | |||||||
the bearings | |||||||
Awo igbelewọn | awọn ohun elo ti | Irin ti ko njepata | |||||
Apoti ebute | Fireemu ati ideri | Simẹnti irin | |||||
Corrosion class | C3 (medium) | ||||||
Ideri skru | Zinc-electroplated steel | ||||||
awọn isopọ | Threaded openings | 2xM16 | 2xM25 | 2xM25 | |||
Awọn ebute | 6 terminals for connection with cable lugs (not included) | ||||||
Awọn keekeke okun | Cable flange included, glands as option | ||||||
Fan | awọn ohun elo ti | Glass-fiber reinforced polypropylene | |||||
Ideri Fan | awọn ohun elo ti | irin | |||||
Paint color shade | Munsell blue 8B 4.5/3.25 | ||||||
Corrosion class | C3 (medium) | ||||||
Stator winding | awọn ohun elo ti | Ejò | |||||
Iboju | Insulation class F. Temperature rise class B unless otherwise stated. | ||||||
Winding protection | 3 PTC thermistors, 150 °C | ||||||
Rotor winding | awọn ohun elo ti | Pressure die-cast aluminum | |||||
Balancing method | Half-key balancing as standard | ||||||
Bọtini ọna | Closed keyway | ||||||
Awọn iho Imugbẹ | Drain holes with closable plastic plugs, open on delivery | ||||||
apade | IP 55 | ||||||
itutu ọna | IC411 |
*) 6206-2Z/C3 in IE3
Motors in brief
Cast iron motors, sizes 160 - 250
Iwọn motor | 160 | 180 | 200 | 225 | 250 | |
Stator and end shields | awọn ohun elo ti | Simẹnti irin | ||||
Paint color shade | Munsell blue 8B 4.5/3.25 | |||||
Corrosion class | C3 (medium) | |||||
ẹsẹ | awọn ohun elo ti | Integrated cast iron feet, bolted feet when terminal box on LHS/RHS | ||||
Awọn apẹrẹ | D-end | 6309 / C3 | 6310 / C3 | 6312 / C3 | 6313 / C3 | 6315 / C3 |
N-end | 6209 / C3 | 6209 / C3 | 6210 / C3 | 6212 / C3 | 6213 / C3 | |
Axially locked bearings | Locked at D-end | |||||
Bearing seals | D-end | Gamma-ring | ||||
N-end | Gamma-ring | |||||
lubrication | Regreasable bearings, regreasing nipples M6x1 | |||||
Measuring nipples for | Ti o wa pẹlu | |||||
condition monitoring of | ||||||
the bearings | ||||||
Awo igbelewọn | awọn ohun elo ti | Irin ti ko njepata | ||||
Apoti ebute | Fireemu ati ideri | Simẹnti irin | ||||
Corrosion class | C3 (medium) | |||||
Ideri skru | Zinc-electroplated steel | |||||
awọn isopọ | Awọn titẹ sii USB | 2xM40, 2xM20 | 2xM63, 2xM20 | |||
Awọn ebute | 6 terminals for connection with cable lugs (not included) | |||||
Awọn keekeke okun | Cable flange included, glands as option | |||||
Fan | awọn ohun elo ti | Glass-fiber reinforced polypropylene | ||||
Ideri Fan | awọn ohun elo ti | irin | ||||
Paint color shade | Munsell blue 8B 4.5/3.25 | |||||
Corrosion class | C3 (medium) | |||||
Stator winding | awọn ohun elo ti | Ejò | ||||
Iboju | Insulation class F. Temperature rise class B unless otherwise stated. | |||||
Winding protection | 3 PTC thermistors, 150 °C | |||||
Rotor winding | awọn ohun elo ti | Pressure die-cast aluminum | ||||
Balancing method | Half-key balancing as standard | |||||
Bọtini ọna | Closed keyway | |||||
Awọn iho Imugbẹ | Drain holes with closable plastic plugs, open on delivery | |||||
apade | IP 55 | |||||
itutu ọna | IC411 |
Motors in brief
Cast iron motors, sizes 280 - 450
Iwọn motor | 280 | 315 | 355 | 400 | 450 | ||
Stator and end shields | awọn ohun elo ti | Simẹnti irin | |||||
Paint color shade | Munsell blue 8B 4.5/3.25 | ||||||
Corrosion class | C3 (medium) | ||||||
ẹsẹ | awọn ohun elo ti | Integrated cast iron feet | |||||
Awọn apẹrẹ | D-end | 2-polu | 6316 / C3 | 6316 / C3 | 6316M/C3 | 6317M/C3 | 6317M/C3 |
4-12-pole | 6316 / C3 | 6319 / C3 | 6322 / C3 | 6324 / C3 | 6326M/C3 | ||
N-end | 2-polu | 6316 / C3 | 6316 / C3 | 6316M/C3 | 6317M/C3 | 6317M/C3 | |
4-12-pole | 6316 / C3 | 6316 / C3 | 6316 / C3 | 6319 / C3 | 6322 / C3 | ||
Axially locked bearings | Locked at D-end | ||||||
Bearing seals | D-end | V-ring or labyrinth seal | |||||
N-end | V-ring or labyrinth seal | ||||||
lubrication | Regreasable bearings, regreasing nipples M10x1 | ||||||
Measuring nipples for | Ti o wa pẹlu | ||||||
condition monitoring of | |||||||
the bearings | |||||||
Awo igbelewọn | awọn ohun elo ti | Irin ti ko njepata | |||||
Apoti ebute | Fireemu ati ideri | Simẹnti irin | Cover steel | ||||
Corrosion class | C3 (medium) | irin | |||||
Ideri skru | Zinc-electroplated steel | ||||||
awọn isopọ | USB | 2-4-pole | 2xM63+2xM20 | 2xM63, 2xØ48- | 2xØ48-60, 60-80, | 2xØ60-80 (2-6-pole) | 2xM2+0 |
Awọn titẹ sii | 60+2xM20 | 2xM20 | 2xØ60-80, 2xM20 | ||||
6-8-pole | 2xØ32-49, 48-60, | 2xØ48-60 (8-pole), | |||||
2M20 | 2xM20 | ||||||
See section Standard terminal box for detailed information. | |||||||
Awọn ebute | 6 terminals for connection with cable lugs (not included) | ||||||
Awọn keekeke okun | Cable flange, glands as option | ||||||
Fan | awọn ohun elo ti | Glass-fiber reinforced polypropylene | |||||
Ideri Fan | awọn ohun elo ti | irin | |||||
Paint color shade | Munsell blue 8B 4.5/3.25 | ||||||
Corrosion class | C3 (medium) | ||||||
Stator winding | awọn ohun elo ti | Ejò | |||||
Iboju | Insulation class F. Temperature rise class B unless otherwise stated | ||||||
Winding protection | 3 PTC thermistors, 155 °C | ||||||
Rotor winding | awọn ohun elo ti | Pressure die-cast aluminum | |||||
Balancing method | Iwontunwonsi bọtini idaji | ||||||
Bọtini ọna | Open keyway | ||||||
Awọn iho Imugbẹ | Drain holes with closable plastic plugs, open on delivery | ||||||
apade | IP 55 | ||||||
itutu ọna | IC411 |
Motor ikole
Exploded view, frame size 315
1 Stator frame
2 End shield, D-end
3 Screws for end shield, D-end
V-ring in 4-8 pole motors
4 End shield, N-end
5 Screws for end shield, N-end
6 Rotor with shaft
7 Key, D-end
8 apoti ebute
9 Terminal board
10 Intermediate flange
11 Screws for terminal box cover
12 Outer bearing cover, D-end
13 Valve disc with labyrinth seal, D-end; standard in 2-pole motors,
14 Bearing, D-end
15 Inner bearing cover, D-end
16 Screws for bearing cover
17 Outer bearing cover, N-end
18 Seal, N-end
19 Wave spring
20 Valve disc, N-end
21 Bearing, N-end
22 Inner bearing cover, N-end
23 Screws for bearing cover
24 Olufẹ
25 Fan ideri
26 Screws for fan cover
27 awo Rating
28 Lubrication plate
29 Grease nipple, D-end
30 Grease nipple, N-end
31 SPM nipple, D-end
32 SPM nipple, N-end
Lapapọ ẹbọ ọja
Motors, generators and mechanical power transmission products with a complete portfolio of services
Awọn ọkọ ayọkẹlẹ IEC
– Low voltage motors
– High voltage induction and synchronous motors
– Marine motors
– Motors for explosive atmospheres
– Motors for food and beverage
– Motors for variable speed drives
– Permanent magnet motors
– Synchronous reluctance motors
– Traction motors
Awọn ọkọ ayọkẹlẹ NEMA
– Low voltage motors
– High voltage induction and synchronous motors
– Marine motors
– Motors for explosive atmospheres
– Motors for variable speed drives
– Permanent magnet motors
– Servomotors
– Washdown motors
Generators
– Generators for wind turbines
– Generators for diesel and gas engine power plants
– Generators for steam and gas turbine power plants
– Generators for marine applications
– Generators for industrial applications
– Generators for traction applications
– Synchronous condensers for reactive power compensation
Mechanical power transmission components,
bearings, gearings
– Mounted bearings
– Enclosed gearing
– Mechanical drive components
– Couplings
– Sheaves and bushings
– Conveyor components
– Geared motor units
Life cycle services
ABB ká portfolio ti drives
Optimal solution for you
Being able to rely on the continuous high performance and efficiency of your operations is something you want to take for granted. ABB variable frequency drives are made with all this in mind, established upon more than 40 years of experience and backed by a broad range of life cycle services.
ABB drives help you to optimize your processes and systems with state-of-the-art motor control technology, resulting in increased energy efficiency, better product quality, and reduced operating costs with higher output, less downtime, and reduced need for maintenance. All ABB drives are designed for easy selection, ordering, installation and use, and they offer integrated safety features, giving you more time to focus on what matters for you and your business.
Our portfolio offers low-voltage AC and DC drives, medium-voltage AC drives, and motion control drives spanning the fractional-kilowatt to multimegawatt power level. There is a drive available for essentially every industry and application and for all types of motors, in environments ranging from water utility facilities to clean electrical rooms, and to harsh coal mines and windy offshore platforms to food and beverage production. This wide product range allows you to select the best-fitting drive solution, providing maximum reliability and efficiency for every need.
Pe wa
www.sogears.com
Alagbeka: + 86-18563806647
Whatsapp/Wechat: +8618563806647
E-mail: