English English
Awọn iwọn apoti ebute

Awọn iwọn apoti ebute

Standard ifijiṣẹ

Standard delivery if no other information is provided. For other network voltages than voltage code D (see description on page 18) and/or side-mounted motors, please contact your ABB sales office.

Iwọn motor Ọpá nọmba Apoti ebute Size of gland plate opening Igun 45 ° Amount and size of threaded Max. con nectable core Number and
    iru on terminal box ti nmu badọgba pluggeed holes, or cable cross-section mm2/phase size of termi 
          sealing end unit   nal bolts
IE2, IE3, IE4 motors              
71 2 ~ 8 integr. - - 2xM16x1.5 1x2.5 6xM4
80 2 ~ 8 integr. - - 2xM25x1.5 1x4 6xM4
90 2 ~ 8 integr. - - 2xM25x1.5 1x6 6xM5
100-132 2 ~ 8 integr. - - 2x M32x1.5 1x10 6xM5
160-180 2 ~ 8 63 B - 2xM40x1.5 1x35 6xM6
200-250 2 ~ 8 160 C - 2xM63x1.5 1x70 6xM10
280 2 ~ 8 210 C - 2xM63x1.5 2x150 6xM12
315SM_, ML_ 2 ~ 8 370 D - 2xM63x1.5 2x240 6xM12
315LKA, LKB 2 ~ 4 370 D - 2xM63x1.5 2x240 6xM12
315LKC 2 ~ 4 750 E - 2xM75x1.5 4x240 6xM12
315LK_ 6 ~ 8 370 D - 2xM63x1.5 2x240 6xM12
355SMA - SMC 2 ~ 4 750 E - 2xM75x1.5 4x240 6xM12
355SMA, SMB 6 ~ 8 370 D - 2xM63x1.5 2x240 6xM12
355SMC 6 750 E - 2xM75x1.5 4x240 6xM12
355SMC 8 370 D - 2xM63x1.5 2x240 6xM12
355MLA 2 ~ 4 750 E - 2xM75x1.5 4x240 6xM12
355MLB, LK_ 2 ~ 4 750 E E-2D 4xM75x1.5 4x240 6xM12
355ML_, LK_ 6 ~ 8 750 E - 2xM75x1.5 4x240 6xM12
400 2 ~ 6 750 E E-2D 4xM75x1.5 4x240 6xM12
400LA, LB 8 750 E E-2D 4xM75x1.5 4x240 6xM12
Ọdun 400LC 8 750 E E-2D 4xM75x1.5 4x240 6xM12
Ọdun 450 LA 2 1200 E E-2D 4xM75x1.5 6x240 6xM12
Ọdun 450 LA 4 1200 E E-2D 4xM75x1.5 6x240 6xM12
450 LB, LC 2 ~ 4 1200 E E-2D 4xM75x1.5 6x240 6xM12
Ọdun 450 LA 6 750 E E-2D 4xM75x1.5 4x240 6xM12
450 LB, LC 6 1200 E E-2D 4xM75x1.5 6x240 6xM12
450 8 750 E E-2D 4xM75x1.5 4x240 6xM12
               
Auxiliary cable entries              
160 - 450 2 ~ 8       2x M20x1.5    
Iwọn motor Earthing on frame Earthing in main terminal box          
71-112 M4 M4          
132 M5 M5          
160-250 dimole M6          
280-400 M10 2xM10          
450 M10 4xM12          

 Apoti ebute

Awọn iwọn apoti ebute

01 Terminal box type 63 and 160.

02 Terminal box types 210 and 370.

03 Terminal box type 750 + adapter.

04 Terminal box type 1200 + adapter.

For motor sizes 71 to 132 the terminal box is integrated in motor frame and the dimensions for terminal boxes can be found in the motor dimension drawings in ABB Library.

To match the correct terminal box with motor sizes 160 - 450, find the motor type and correspondent terminal box type on the previous page. The box types and heir dimensions are presented on this page.

Terminal box types acc. A1 B1 H1 Awọn abulẹ
to current capacity       awo
        šiši
63 247 247 109 B
160 300 310 154 C
210 416 306 177 C
370 451 347 200 D
750 with E-D adapter 686 413 219 D
750 without E-D adapter 523 413 219 E
1200 with E-2D adapter 1000 578 285 2xD
1200 without E-2D 697 578 285 E
ti nmu badọgba        
1200 with E-2E adapter 1195 578 285 2xE
1200 with E-3D adapter 1250 578 285 3xD

 Dimensions for terminal box inlets

Corresponds to motor sizes 160 and above

Flange c e f g d
šiši mm mm mm mm thread type
B 31 120 30 120 M6
C *) 71 194 62 193 M6
C **) 67 193 62 193 M8
D 100 300 80 292 M10
E 115 370 100 360 M12

 Note! The C flange is different depending on frame

iwọn

*) for frame sizes 200-225

**) for frame size 280

 Apoti ebute

Awọn keekeke okun

The motors are delivered as standard with plugged cable entries or cable sealing units as described in the previous section. There is available a broad selection of different type of cable glands, which are suitable for different types of cable and outer diameter ranges.

Size of threaded opening for  Cable gland(s) nickel plated EMC Cable gland(s) nickelplated Cable gland(s) plastic,
USB ẹṣẹ brass, variant code 230 or 731 brass, variant code 704 variantcode 375 or 376
Metric (std) Cable outer Cable outer Cable outer
  iwọn ila opin, iwọn ila opin, iwọn ila opin,
  mm mm mm
M16 x 1.5 4 ~ 12 4 ~ 8 4 ~ 12
M20 x 1.5 4 ~ 12 4 ~ 12 4 ~ 12
M25 x 1.5 10 ~ 18 10 ~ 18 10 ~ 18
M32 x 1.5 14-24 14-24 14-24
M40 x 1.5 22-32 22-32 22-32
M50 x 1.5 26-35 26-35 26-35
M63 x 1.5 *) 35-45 35-45 35-45
M75 x 1.5 46-62 46-62 ko si

Threaded openings for cable glands with NPT thread (variant code 730)

The standard delivery for the motors are provided with openings for cable glands with metric threads as listed in the section describing the standard terminal box. If NPT threads will be needed, the variant code 730 is to be ordered. If nothing else is stated on the order, the sizes in tables below will be delivered.

Motor fireemu iwọn Main cable entries NPT plug
80-112 1 x ¾” -
132 2 x ¾” 1 x ¾”
160-180 2 x 1 ¼” 1 x 1 ¼”
200-250 2 x 1 ½” 1 x 1 ½”
280 2 x 2 " 1 x 2 "
315-450 2 x 3 " 1 x 3 "
Motor fireemu iwọn Cable entries for NPT plug
  awọn oluranlọwọ  
80-112 2 x ¾” 2 x ¾”
132 1 x ¾” 1 x ¾”
160-450 2 x ¾” 2 x ¾”

 Gland plates with threaded openings for cable glands of nonstandard size

If the standard size of threaded openings for cable glands is not suitable then nonstandard size openings are also available, either by fitting the reducers to make the openings smaller or by increasing the amount or size of holes. The maximum possible size and amount for each gland plate size is listed below. Threaded openings of non-standard size can be ordered by using variant codes 554 and 727.

Gland plate size Maximum amount and size of
  asapo ihò
B 2xM40
C 2xM63
D 2 x M90 or 3 x M75
E 2 x M90 or 4 x M75

 Apoti ebute

Terminal boxes and boards

01 Integrated terminal box for motor sizes 71 - 132. Tapped holes for cable entries.

02 Terminal board for motor sizes 71 - 80.

03 Terminal board for motor sizes 90 - 112, IE2, and 90 - 100, IE3.

04 Terminal board for motor sizes 132, IE2, and motor sizes 112 - 132, IE3.

05 Terminal box for motor sizes 160 - 250. Connection flanges with tapped cable entries.

06 Terminal board for motor sizes 160 - 250.

 The pictures below show standard terminal boxes and the corresponding terminal boards for various motor sizes.

 07 Terminal box for motor sizes 280 - 315, except LKC. Connection flange with tapped cable entries.

08 Terminal board for motor sizes 280 - 315, except LKC.

09 Terminal box for motor sizes 315-355, except for 355MLB, LK_2-4 where picture 11 applies. Connection flange with tapped cable entries.

10 Terminal board for motor sizes 355-400 and 315 LKC.

11 Terminal box for motor sizes 450, with adapter and cable sealing end unit.

12 Terminal board for motor sizes 450.

 

 Apoti ebute

Terminal box alternatives

01 Main terminal box.

02 Adapters, Flange with glands; cable sealing end units.

Optional adapters

There is a broad selection of cable termination accessories available to allow termination of one or several cables. The most common ones are explained below.

Bawo ni lati paṣẹ?

– Check first that the teminal box itself allows mounting of the desired cable and cores (refer to motor type and terminal box type cross reference on previous page)

– If very large cables are used it might be necessary to use a larger terminal box than standard. Select the right cable gland(s) or cable sealing end unit(s) that match outer diamater of the cable(s)

– Select appropriate adapter or flange

– Note that turning the terminal box to a nonstandard position might limit the use of some adapters.

Main terminal box and maximum single core

Abala ni irekọja

You can select one size larger than standard terminal box if a larger single cross-section is needed.

The standard sizes of the main terminal box are listed in the following table. The terminal box is named according to its current-carrying capacity, from 120 to 1200. Check also the capacity of the cable entry to make sure that the cables fit.

A larger terminal box can be ordered with variant code 019.

Standard ter  Large termi  Iwọn ti Max single
minal box nal box nsii, Abala ni irekọja
    apoti nla mm2 /phase
120 210 B 1 x 70
210 370 C 2 x 240
370 750 D 2 x 300
750 1200 E 4 x 500
1200 - - -

Ordering example

Motor Cables 200 kW, 4 pole, 400 V 50 Hz 2 pieces, outer diameter 58 mm, single core cross section 185 mm2 ,    
  clamping device needed, cables coming from below    
Needed one terminal box for anticondensation heaters and another for temperature detectors, material must be cast iron.      
motor M3BP 315 MLA 4-pole, B3    
ti nmu badọgba D-D - variant code 293    
Cable sealing end unit Variant code 278    
Dimole Variant code 231    
Awọn Oluranlọwọ Variant codes 380, 567, 568    

 

Optional adapters

To allow easy termination of cables entering the terminal box from above or below, an angle adapter is recommended. These are available for motor sizes 280 and above and can also be used to allow the mounting of several cable sealing end units or gland plates. For exact suitability on a certain motor size, refer to the ‘terminal box opening’ column in section Standard terminal box.

Variant code 292 293 294 295 296 444
Suited for motor sizes 280 315, 355 315 LKC IE2, 315 LKC IE2, 315 LKC IE2, 315 LKC IE2,
      355 SM_ 2-4 poles, 355 SM_ 2-4 poles, 355 SM_ 2-4 poles, 355 SM_ 2-4 poles,
      400 - 450 400 - 450 400 - 450 400 - 450
Opening to terminal C D E E E E
apoti            
Flange or opening for C D D 2 x D 3 x D 2 x E
end unit            
awọn ohun elo ti irin irin Simẹnti irin irin irin irin
awọn akọsilẹ       To wa bi bošewa Only possible on Only possible on type
        delivery for frame type 1200 terminal 1200 terminal box
        sizes 400-450 and apoti.  
        355MLB, LK_ 2-4.    

 

Cable sealing end units

As an alternative to flanges and cable glands, cable sealing end units can be used. These allow more space for spreading the cores for easy termination.

Cable sealing end units have rubber-sealed entries for one of two main cables. In addition, there are two plugged M20 holes for auxiliary cables.

  kekere alabọde ti o tobi
Variant code 277 278 279
Suited for motor sizes 280 315, 355, 315, 355,
    except 315 LKC IE2, except 315 LKC IE2,
    355 SM_ 2-4 poles 355 SM_ 2-4 poles
Opening to terminal box C D D
USB lode opin 1 - 2 cables, 48 - 60 mm 1 - 2 cables, 48 - 60 mm 1 - 2 cables, 60 - 80 mm
Cable entry for auxiliary cable 2xM20 2xM20 2xM20
  plugged holes plugged holes plugged holes
Additional optional variants EMC cable gland (704); EMC cable gland (704); EMC cable gland (704);
  Standard gland with clamping device Standard gland with clamping device Standard gland with clamping device
  -231 -231 -231

 

Auxiliary terminal box

You can equip motors from frame size 160 upward with one or several auxiliary terminal boxes for connection of auxiliaries like heaters or temperature detectors. The standard auxiliary terminal box material for motor sizes 280 - 450 is aluminum and for 160 - 250 cast iron. For 280 - 450, cast iron as box material is also available as an option.

Connection terminals are of spring-loaded type for quick and easy connection. These are suitable for up to 2.5 mm2 wires.

Auxiliary terminal boxes for 280 - 450 are equipped with an earthing terminal. The first auxiliary terminal box is located on the right-hand side at D-end as standard.

The standard cable entry size is M20 for the aluminum box and M16 for the cast iron box, and the number of entries depends on the terminal box type and the number of selected auxiliaries.

Related variant codes  
380 Separate terminal box for temperature detectors,standard material
418 Separate terminal box for auxiliaries, standard material
567 Separate terminal box material: cast iron
568 Separate terminal box for heating elements, standard material
569 Separate terminal box for brake

 

Small auxiliary aluminum terminal box for motor sizes 280 - 45 (variant codes 418, 568, 380, 569)

The size of terminal box ordered with these codes depends on the number of accessories ordered.

80 x 125 mm, max 12 strips. Earthing size M4

Large auxiliary aluminum terminal box for motor sizes 280 - 450.

The size of terminal box ordered with these codes depends on the number of accessories ordered.

80 x 250 mm, max 30 strips. Earthing size M4

Auxiliary cast iron terminal box

Frame size for motor sizes 160 - 250 (variant code 418):

111 x 162 mm, max. 18 strips. No earthing.

Frame size for motor sizes 280 - 450 (variant code 567):

208 x 180 mm, max 30 strips. Earthing size M6

Awọn aworan Dimension

Iṣẹ ṣiṣe ilana IE2 simẹnti irin

  IM1001, IMB3 ati IM3001, IMB5                   IM1001, IMB3           IM B5 (IM3001)      
  D   GA   F   E   L max   A B B1 C HD K M N P S
Iwọn motor 2 4 ~ 8 2 4 ~ 8 2 4 ~ 8 2 4 ~ 8 2 4 ~ 8         max          
71 14 14 16 16 5 5 30 30 295 294 112 90 - 45 178 7 130 110 160 10
80 19 19 21.5 21.5 6 6 40 40 363 363 125 100 - 50 194 10 165 130 200 12
90SL_ 24 24 27 27 8 8 50 50 356 356 140 100 125 56 218 10 165 130 200 12
90L_ 24 24 27 27 8 8 50 50 390 390 140 100 125 56 218 10 165 130 200 12
100L_ 28 28 31 31 8 8 60 60 381 381 160 140 - 63 247 12 215 180 250 15
100ML_ 28 28 31 31 8 8 60 60 403 403 160 140 - 63 247 12 215 180 250 15
100LK_ 28 28 31 31 8 8 60 60 435 435 160 140 - 63 247 12 215 180 250 15
112 28 28 31 31 8 8 60 60 403 403 190 140 - 70 259 12 215 180 250 15
132 38 38 41 41 10 10 80 80 532 532 216 140 178 89 300 12 265 230 300 15
160) 42 42 45 45 12 12 110 110 584 584 254 210 254 108 421 14.5 300 250 350 19
160) 42 42 45 45 12 12 110 110 681 681 254 210 254 108 421 14.5 300 250 350 19
180 48 48 51.5 51.5 14 14 110 110 726 726 279 241 279 121 461 14.5 300 250 350 19
200 55 55 59 59 16 16 110 110 821 821 318 267 305 133 528 18.5 350 300 400 19
225 55 60 59 64 16 18 110 140 849 879 356 286 311 149 573 18.5 400 350 450 19
250 60 65 64 69 18 18 140 140 884 884 406 311 349 168 626 24 500 450 550 19
280SM_ 75 75 79.5 79.5 20 20 140 140 1053 1054 457 368 419 190 733 24 500 450 550 18.5
280ML_ 65 75 69 79.5 18 20 140 140 1189 1189 457 368 419 190 785 24 500 450 550 18.5
315 ọsẹ 65 80 69 85 18 22 140 170 1088 1118 508 406   216 845 28 600 550 660 23
315 SM_ 65 80 69 85 18 22 140 170 1190 1220 508 406 457 216 845 28 600 550 660 23
315 ML_ 65 90 69 95 18 25 140 170 1285 1315 508 457 508 216 852 30 600 550 660 23
315 LK_ 65 90 69 95 18 25 140 170 1491 1521 508 457 508 216 880 30 600 550 660 23
355 SM_ 70 100 74.5 106 20 28 140 210 1409 1479 610 500 560 254 958 35 740 680 800 23
355 ML_ 70 100 74.5 106 20 28 140 210 1514 1584 610 560 630 254 958 35 740 680 800 23
355 LK_ 70 100 74.5 106 20 28 140 210 1764 1834 610 710 900 254 958 35 740 680 800 23
400 L_ 80 110 85 126 22 28 170 210 1851 1891 710 900 1000 224 1045 35 940 880 1000 28
400 LK_ 80 100 85 106 22 28 170 210 1851 1891 686 710 800 280 1045 35 740 680 800 24
450 80 120 85 127 22 32 170 210 2147 2187 800 1000 1120 250 1293 42 1080 1000 1150 28

1) MLA, MLB 2, MLB 8, MLC 2

2) MLB 4-6, M3C 4-8, MLD, ML3

IMB14 (IM3601)

Iwọn motor M N P S T
71 85 70 105 6 2.5
80 100 80 120 6 3
90 115 95 140 8 3
100 130 110 160 8 3.5
112 130 110 160 8 3.5
132 165 130 200 10 3.5

The table gives the main dimension in mm. For detailed drawings please see our web pages www.abb.com/motors&generators.

 

 

 Geared Motors Ati Electric Motor olupese

Iṣẹ ti o dara julọ lati ọdọ iwakọ gbigbe wa si apo iwọle rẹ taara.

Gba ni Fọwọkan

Yantai Bonway olupese Co.ltd

ANo.160 Changjiang opopona, Yantai, Shandong, China(264006)

T + 86 535 6330966

W + 86 185 63806647

© 2024 Awọn ọmọ-oorun. Gbogbo awọn ẹtọ wa ni ipamọ.